description

The rounding or wire drawing operation is the second step in the forming field. The lubricant used must work in conjunction with the upstream surface treatment and the final molding oil used downstream. This is the key point of the processing of difficult parts.

The commonly used lubricant is a dry powder lubricant, called soap powder. During the drawing operation, it passes through the die to form a pressure-resistant lubricating film. In order to reduce the interaction force between the molding oil and the machine, it is important to understand these lubricants. The most common adverse effects are:

Increase in oil viscosity and frequency of oil changes.

The suspension contains particulate matter, which increases abrasion.

Tool life is shortened.

Product advantages

The lubricating film has better temperature and shear resistance

Reduce the residue on the wire

Good compatibility with grease, can reduce the swelling of soap powder

Reduce residues on the machine and reduce fire hazards

Extend the oil change interval, thereby reducing oil consumption