description

The blades or scissors used to cut glass frit (1 150°C) must be permanently lubricated. A solution/emulsion of soluble lubricating oil and water is continuously sprayed on these blades. When water (99% mixture) cools the scissors, BIOGLASS shear lubricant can ensure its lubrication.

Good lubrication can eliminate cutting lines and prevent molten glass from sticking to the blade. It can also reduce the wear of large scissors, thereby reducing the frequency of their replacement.

Product advantages

Concentrated products need to be diluted to a low concentration before they can be used (0.1 – 0.8%)

Can be used for oil loss or recycling to reduce product consumption and water consumption

Can be used in soft or medium hard water (TH 20°F = CaCO3200 ppm)

High lubricity

Anti-corrosion

Less residue on the machine, feeder and conveyor → Clean environment

Reduce or eliminate blockages in the spray system

• 100% synthetic products or products mixed with mineral lubricants