Before pressing

Depending on your cutting tool, we provide a product suitable for sawing your blank before extrusion.

Xushan provides you with biodegradable plant-derived lubricants, which are applied to the saw through micro-lubrication (MQL minimum lubrication) to prepare blanks before heating and extrusion operations.

Thanks to its expertise in working fluids, Sushang has a series of cutting oils, which can be used for the cooling of tools or saw blades and the lubrication of tools or saw blades when cutting aluminum billets.

Product advantages:

Use plant-based lubricants to replace traditional petroleum or mineral-based lubricants, while complying with eco-citizen practices.

• The use of these concentrates is pure and compatible with ferrous and non-ferrous metals.

After squeezing

For cutting and extruding profiles, Suishan provides you with lubricant emulsion for cooling, and lubricating cutting tools, and to prevent aluminum profiles from sticking when they are withdrawn.

These silicone emulsion-based products are effective alternatives to traditional petroleum-based lubricants. The special chemicals contained allow them to be used in a wide temperature range, avoid clogging or stains, and at the same time prevent corrosion. The chemicals used are fully compatible with subsequent paints.

These concentrates should be diluted in water before use: usually between 1%-4%.

Product advantages:

The adhesion temperature has a wide range, and it can withstand high temperatures up to 450°C.

Does not pollute parts

Reduce blockage of cutting tools with low usage rate

In order to protect the guillotine tools, we also provide you with water or solvents containing boron nitride according to your production requirements.